Three-phase 24-meter positions distributed on two sets of meter racks, the rack has two rows arranged on one side with 6 positions for each. Each row is equipped with a rotatable mechanism, and the suspension rack adopts a 60° bevel structure relative to the horizontal plane, whereas the angle of the bevel can be adjusted.

The test rack has all the protections against direct and indirect electric shocks.

There is a three-color indicator light on the top of each rack.
Automatic wiring function for each position
The automatic test rack has the function of fully automatic wiring and automatic positioning
among them, the stepping motor is used to drive the automatic wiring for each station, and the near-infrared reading head and the photoelectric head outside the meter can be automatically aligned.
Automatic short-circuit function for each station
Each station can automatically check the open circuit status and automatically start the short circuit function
Each meter position has customized QCD for Landis+Gyr meter E650/E660/E850/E860 four models of electricity meters as follow drawings for reference

A set of 24 ports MOXA serial port server will be installed under the table-board of the rack to provide meter communication capability and realize automatic calibration of meters at a time.

Inquiry Cart 0